Product Added to Basket. View basket

Mechanical Edge Finders

Mechanical Edge Finders

Mechanical Edge Finders

Edge finders are used to find the exact position of a workpiece relative to the spindle of a milling machine.

How it Works
  • Hold the edge finder (using a 10mm collet or end mill holder) in the spindle of the mill and set the tip off-centre.
  • Set the spindle to run at about 500rpm and slowly advance the tip (in X or Y) towards the edge of the work.
  • Continue feeding when the tip touches the work and as the spindle approaches the datum, the two central flanges of the edge finder will begin to align.
  • At the moment the machine passes centre, the tip abruptly kicks sideways about 1.5mm as it tries to run along the edge of the work. At this point stop feeding and note down the handwheel position.
  • The spindle centre will now be exactly half the edge finder's tip diameter from the edge of the work.
  • If required, the procedure can be repeated to double check your handwheel reading.
  Shank Dia. Tip Dia. Overall
Length
A 10mm 4mm 90mm
B 10mm 82mm
C 6mm 75mm
D 4mm/Point * 78mm

* Double ended with an Edge and Centre Finder.
100-105-00100 Mechanical Edge Finder 10mm dia.Shank x 4mm dia.Tip RRP: £9.66 Inc.VAT
£4.17 Excl.VAT
£5.00 Inc.VAT 		In
Stock 		Qty:
Add to Basket
Wish List
100-105-00150 Mechanical Edge Finder 10mm dia.Shank x 10mm dia.Tip RRP: £10.06 Inc.VAT
£8.05 Excl.VAT
£9.66 Inc.VAT 		In
Stock 		Qty:
Add to Basket
Wish List
100-105-00200 Mechanical Edge Finder 10mm Shanks x 6mm dia.Tip RRP: £4.21 Inc.VAT
£2.50 Excl.VAT
£3.00 Inc.VAT 		In
Stock 		Qty:
Add to Basket
Wish List
100-105-00250 Mechanical Combi Edge/Centre Finder 10mm Shank x 4mm dia.Tip RRP: £3.41 Inc.VAT
£2.71 Excl.VAT
£3.25 Inc.VAT 		In
Stock 		Qty:
Add to Basket
Wish List
Whilst every effort has been made to make the information and prices correct we cannot
accept any responsibility for inaccuracies. Errors & Omissions Excepted.
Copyright © 2024, Arc Euro Trade Ltd. All Rights Reserved.
How we use cookies  Close